20 Tube Solar Manifold Collector System with Hooks for Slop/Pitched Roof Top

• Customization: Available
• Structure: Separate Type
• Pressure: Pressurized
• Interior Material: Copper
• Collector Components: Glass Vacuum Tube
• Composition: Collector
• Heat Pipe Tube Number: 30tubes
• Manifold: Copper Passager&Aluminum Case
• Tubes: Three Target High Performance
• Bracket: Aluminum Alloy
• Transport Package: Cartons
• Origin: China
• HS Code: 84199010
• Production Capacity: 180000sets Per Year

Product Description

Product Description

Heat pipe solar collectors consist of 3 main parts, heat pipe vacuum tube, manifold, mounting bracket. They are capable of working more efficiently for households in cold climate. The evacuated tubes are coated with a high performance selective absorbing surface that minimizes the reflection of the sun rays. Solar water heater system is the best choice to save the energy and cost for your home. This type with aluminum frame is suitable for flat roof and slope roof.

Pressurized solar collector is a device to absorbing the solar energy for heating hot water of the system ,it usually combines with solar water heater tank for storage the solar energy. This solar collector adopts the heat pipe vacuum tube which much higher and fast transfer the heat energy. Heat pipe in vacuum tube absorbs the heat from the solar insulation and transfer by its condenser to the manifold for heating the flow pipe water or fluid.
 

 

Detailed Photos

 

Product Parameters

 

Specification
Flow Header		High quality red copper Φ35*1.0mm, inlet & outlet Φ22mm
Manifold Shell		High-quality black/ gray aluminum alloy 2mm
Insulation		High-density compression-moulded rockwool&polyuranthe foaming 50mm
Heat pipe tube		Three-target coated vacuum tube, Φ14mm condensor copper heat pipe, Aluminium fin, silicon tube seal
Mounting bracket		Black/ original color aluminum alloy 1.8mm, universal bracket suitable for roof or exterior wall installation
Accessories		Thermal paste,copper connectors,Stainless fasteners
working pressure		6.0 Bar
collector tilt Angle		20°~80°(ensure optimum heat pipe operation)
Hail Resistance		< Φ30 mm
Anti-freezing		> - 40°C
Item No.	Heat Pipe Vacuum Tube		Aperture	Collector Size	Fluid	Packing	Container Loading Sets			FOB Shanghai Price, USD/set
	Tube Nos.	Tube Size/ mm	Area (M2)	L*W (mm)	Liter (L)	Volume/cbm	20GP	40GP	40HQ
VODHC-5812	12	Φ58*1800	1.12	1950*960	0.8	0.21	141	281	333	157
VODHC-5815	15	Φ58*1800	1.40	1950*1185	0.9	0.24	126	253	299	189
VODHC-5818	18	Φ58*1800	1.68	1950*1410	1.1	0.30	100	201	237	223
VODHC-5820	20	Φ58*1800	1.87	1950*1560	1.2	0.32	95	190	225	243
VODHC-5825	25	Φ58*1800	2.33	1950*1935	1.6	0.36	83	165	195	299
VODHC-5830	30	Φ58*1800	2.80	1950*2130	1.8	0.45	66	132	156	357

Installation Instructions

 

How to install one solar collector?
1.Install the frame first ,see the frame install drawing
2.Place the manifold and fix the screw 
3.Following the following steps to installed the tubes:
Step1:first install the nylon cap on the bottom track,then screw off the jacket from the cap.
Step2:put the heat conduction oil on the condensor of heat pipe
Step3:Insert the vacuum tube inside the nylon cap(Be careful :don't smash the vacuum tube on the ground in avoid it will be broken)
Step4:hold the vacuum tube tightly ,then insert it into the oposite hole(copper cap)which on the monifold slowly.
Step5:fix bact the jacket back the nylon cap.

 

Steps of simple show:

Types of system

How to choose the right system with the heat pipe solar collector?
There are two tyes of the system commonly.

The heat pipe  Solar Collector mainly works  wtih tank  for storage heating. There are two system: Passitive system   and Active system.
Passitive system we can call thermosyphone  hot water system,The heat pipe solar collector transfer the heat to tank by natural gravity. Fluid (water ,glycol ) from inlet is heated and become lighter density compare to non-heated fluid, this lighter density will go up to the outlet and heavier fluid will go down to inlet of collector . This thermosyphone priciple continue to happen until sun down . 

Our topic solar collector  thermosyphone  heater for your checking as below:


                                                                                                                                         


Active flat plate solar collector system : Differ from the termosphone system, the circulation is  not depends on nature gravity , it is actived by circulation pump . Pump works when the temperature difference achieve the setted valve, the heat will be exchanged between pressurized heat pipe  solar collector and storage tank . Tank can be with coil (one ,two or more coils)  as heat exchanger  for indirectly heat exchange or without coil for directly heat exchange.


Topic active flat plate solar collector system as below:
Split Pressurized heat pipe solar water heater system  with heat exchanger: Tank with copper coil(s) as heat exchanger ,system active with a workstation which combinated with circulation pump,controller, safety valve,pressure guage,expansion tank.


Split pressurized flat plate  solar heating system without heat exchanger: Tank designed without coil ,and no external heat exchanger is applied to system. System is drived by simple circulation pump and  a controller,if system is too big ,a expansion tank will be considered as pressure balance device.


Non-presurized heat pipe solar hot water system,compare to the pressurized system ,it is open loop system. Tank is non-pressurized with air vent ,so it is connected to the atmosphere. System runs without pressure. Because it is  economic , it is widely applied to big project. 

Our Advantages

Advantages of the heat pipe solar collector

1.heat pie solar collector devices can play as  high temerature source 
2.Heat pipe solar collector will be easy to maintain, even one tubes broken,it will not effect the whole system.
3.It is available for open and close loop freely.
4.Our manifold case can be aluminum and color or stainless steel ,can help customer to save the cost

Company Profile

 

Haining Vod Solar Energy  Industry CO.Ltd. is one of solar water heater manufacture focus on solar products and solar solutions for more than 20years. As solar water heater manufacture, we do mainly produce a large different ranges of solar water heater: open loop solar water heater, close loop solar water heater, solar thermal collector ,heat pipe solar collector and customized solar water heater. As a developing and energy saving factory, we supply different energy saving products: air source heat pump, solar pump, solar light, solar pv on-grid and off grid system, solar refrigerator, solar AC and so on.
 
In order to produce a high-quality solar water heater, we do investigate on large amount on producing machine and skill workers. We adopts 8 location automatic punching machine, arc-argon welding machine, automatically lines for solar manifold ,up and down foaming platform for foaming and other lead technical machines. About 85% workers have more than 10years working experience in solar water heater manufacturing. The professional engineer team is built especially for large scale solar water heating system design and installations. The team offers different solar solutions according to customer's different project request or single products request.
 
As a responsible solar water heater manufacture, we have a strict quality control in materials and production, we pay the double attention on producing. Even a screw, we test and choose the best for our solar water heater. We are do improvement details according the customer feedback and producing process. To offer a quality solar water heater, 100% solar water heater tank are tested and a sample set are installed to check if all is fine before delivery. All solar water heater we produced; the lifetime is more than 10years.Free exchange on damage goods fall in our warranty period.

 

FAQ

 

1.What is the application of the heat pipe solar collector?

Space heating.
Heating the swimming pool
Domesitc hot water supplier
Preheating of fluids in industrial parts

2. Where can i installed the heat pipe solar collector?

It can be installed on the rooftop of a building whatever slope or flat roof.
If it is flat roof,we can design a bracket with different angle which suitable for your local lattitude.
Normally 30degree or 45degree 

3. What's the package of flat plate solar collector?
If it is full container loading,the package will be  cartons.
If it is bulk delivery , in order to protect tubes from damage, wooden case is applied.


4.Can you help to give the solar solutions?

Sure ,we have being dealing with all kinds of solar water heater system and offer the best solar solutions for customers all the time.

We offer all kinds of the solar hot water system  solution.welcome to inquiry.